Up North Aviation
  • Home
  • About
  • The process
  • What my CNC can't do !!!
  • Panel Templates
  • Panel Pricing
  • Photo Gallery
    • Vans >
      • Vans RV-4
      • Vans RV-6
      • Vans RV-7
      • Vans RV-8
      • Vans RV-9
      • Vans RV-10
      • Vans RV-12
  • Testimonials >>>>>>>>>>
    • Vans RV - 4
    • Vans RV - 6
    • Vans RV - 7
    • Vans RV - 8
    • Vans RV - 9
    • Vans RV - 10
    • Vans RV - 12
  • Favorite Sites
The engraving process is as follows:

The engraving offered includes the following: 
                             (Note - extra charge for stripping painted caps)
  • UD-3 Cap Casting (top plate) will be cleaned and prepared with acid etch & scotch brite
  • Plate will be engraved with selected text layout
  • Lettering will be filled with Black,Red or Blue paint then heat cured.
  • Lettering may remain unpainted if desired
  • A top clear coat will be applied and heat cured. The clear coat is an Avgas proof coating (Note: Solvents like lacquer thinner will attack the clear coat & lettering)
  • You can request the caps be unpainted & no clear coat applied

What you must do:
  • Decide on which text layout you wish to have engraved by selecting from examples 1 to 10 on chart below. Also need # of gallons plus N number if applicable
  • Decide if the lettering is to be black, red, blue or unpainted with no clear coat
  • If you want NEW top plates add $14.00 per plate.
  • If you want your current top plates engraved, remove your UD-3 top plates and send them to me, I will engrave and send them back to you. 
  •             Do not send the entire cap, just the Cap Casting (Top Plate)
                        (You can leave the teflon washers on the top plates)
  • NOTE:    E-mail me before sending your caps !!!!

Payment may be made by CHECK or PAYPAL (PayPal has processing fee)

                                  *  Cost Summary (includes shipping to you)

                               ADD 5.0% to the following prices if using PayPal
  • Engrave your current top plates                       $55.15
  • Engrave new top plates                                   $83.15
  • Extra charge for stripping painted plates           $15.00 each


See below for instructions from USHER for dis assembly, assembly and maintenance of your USHER caps.


Picture

Care and Feeding of your Usher  UD-3 Fuel Caps
Picture
                                                                                goto top 
Proudly powered by Weebly