Up North Aviation
The following prices are for a panel on VANS RV
Models - RV-4*, 6*, 7, 8, 9, 10, 12, 14
* For RV-3, RV-4 and RV-6. Kits were not match drilled so I need your old panel to digitize and generate a CAD drawing that matches your particular panel.
- $375 + Shipping - Layout and cut panel
- $80 - $160 Digitize current panel to generate CAD drawing ( cost depends on panel size and complexity)
NOTE: You order blank panel or raw material ( max size 2' x 4' ) and have it shipped: C/O Up North Aviation
665 Airport Rd - Unit 2
Swanton, VT 05488
For EXPERIMENTAL aircraft other than VANS, send me an e-mail to discuss a price.
A $175 deposit is requested to get started on your panel.
Price Includes:
- As little or as much design and layout as you need
- No limit to the CAD work. I will tweak the design until you are satisfied
- Every time a change is made, a drawing will be sent for your review
- A final FULL SCALE drawing will be supplied for you to have printed and fit to your aircraft - If you still need changes, we keep on working !!!
- Once the drawing is approved
- A blank panel (Supplied by you) will be CNC cut
- Panel will be photographed, packed and shipped
NOTE: You are responsible for shipping cost which in the continental US is around $15 - $35 +/- via UPS Ground. You can request USPS Priority Mail or Fed-X return shipping if you like.
The $375 Price Does Not Include Extras Like:
- Digitizing of OLD panel
- Panel cutout covers
- Plates for mounting Vents
- Any extra work not part of the main panel
Models - RV-4*, 6*, 7, 8, 9, 10, 12, 14
* For RV-3, RV-4 and RV-6. Kits were not match drilled so I need your old panel to digitize and generate a CAD drawing that matches your particular panel.
- $375 + Shipping - Layout and cut panel
- $80 - $160 Digitize current panel to generate CAD drawing ( cost depends on panel size and complexity)
NOTE: You order blank panel or raw material ( max size 2' x 4' ) and have it shipped: C/O Up North Aviation
665 Airport Rd - Unit 2
Swanton, VT 05488
For EXPERIMENTAL aircraft other than VANS, send me an e-mail to discuss a price.
A $175 deposit is requested to get started on your panel.
Price Includes:
- As little or as much design and layout as you need
- No limit to the CAD work. I will tweak the design until you are satisfied
- Every time a change is made, a drawing will be sent for your review
- A final FULL SCALE drawing will be supplied for you to have printed and fit to your aircraft - If you still need changes, we keep on working !!!
- Once the drawing is approved
- A blank panel (Supplied by you) will be CNC cut
- Panel will be photographed, packed and shipped
NOTE: You are responsible for shipping cost which in the continental US is around $15 - $35 +/- via UPS Ground. You can request USPS Priority Mail or Fed-X return shipping if you like.
The $375 Price Does Not Include Extras Like:
- Digitizing of OLD panel
- Panel cutout covers
- Plates for mounting Vents
- Any extra work not part of the main panel
